Page 1 - Hermetic Condensing Units

Hermetic Condensing Units

RCS Series Air Cooled Hermetic Condensing Units

Specification :-

* Hermetic Compressor
* Designed for operation on R404A
* Polyolester oil charge.
* All units are supplied with a holding charge of OFN.
* Single and Twin fan models (dependant on capacity)
* HP/LP Switch - auto reset fitted as standard.
* Crankcase heaters fitted as standard.

(except RCS75-175 available as an option)
* Single and three phase models available.
* All condenser fans are 240-1-50hz suitable for fan

speed control (except RCS50-75)
* Liquid receivers are fitted with a fusible plug or
pressure relief valve in accordance with EN378-2-2008

The RCS series of Air Cooled Condensing Units have been designed and built in the UK specifically for the ever increasing
demand for high specification equipment supplied on short lead times.
Manufactured in our Suffolk factory by our fully qualified staff under our quality control system in accordance with the Pressure
Equipment Regulations (97/23/EC) All equipment is CE marked and Final Test and Inspection Reports and Declarations of
Conformity are avialble on request.
The RCS series uses selected models from the Tecumseh hermetic compressor ranges, reliability and quality being the main
criteria.
There is a complete range of optional items available to order so that each unit can be customised to suit specific requirements.
The RCS series incorporates medium/high temperature condensing units designed to operate at evaporating temperatures
ranging from -25oC up to +10oC and low temperature condensing units for -40oC up to -10oC evaporating temperatures.

Model No. Explanation - Hermetic Models HTZ 1ph

RCS 200

1ph = 240V-1ph-50hZ
3ph = 440V-3ph-50hz

HTZ: High temperature range -25oC to +10oC
LTZ: Low temperature range -40oC to -10oC

Compressor: Nominal HP : 200 = 2hp

Robert C. Scutt Series Condensing Unit

November 2012 Order Line : 01449 722274 1